Photoluminescent Self-adhesive Polycarbonate
 |
|
Product description Self-adhesive photoluminescent polycarbonate film with 0.3 mm thickness, easy to clean. Application The efficiency of self-adhesive photoluminescent polycarbonate fixation is conditioned by the cleanliness of application surface. Only smooth surfaces, without dust, fat and all kind of dirtiness will be able to allow good adhesion of the self-adhesive photoluminescent polycarbonate. To clean the surface where it is desired to apply the self-adhesive product, it is advisable to use a quick-drying degreaser. The application of this product on rough, porous or uneven surfaces is not recommended. During the installation, the temperature should be equal to or greater than 10 ºC. Once installed, the product tolerates a temperature variation between -40°C and + 70°C. Quality The quality of
products is ensured by a rigorous process of quality control with our
own laboratory conducting in-house testing whilst observing all
applicable norms. The products are in conformity with our catalogue and according to the relevant National and International Norms and Legislation. Printing High quality gloss paint with UV resistance. Cleanliness The products do not require any particular attention other than to periodically wipe clean either with a dry clean cloth or damp cloth. Do not use detergents. Health and Safety The product does not contain any radioactive substances. In terms of toxicity all products are considered as "safe” in accordance with EN 71-3). Customized projects We offer a wide range of products with different types of adhesives, mechanical resistance and thicknesses. Contact us through the email: commercial@everlux.com To access the complete technical sheet, please go page Downloads |
